A straw and clay house
A straw house today is not a haystack plastered with clay. In our homes it is a timber frame filled with compressed straw, a panel that arrives at production finished, with clay forming its interior surface.
The straw wall build-up
From the inside out:
| Layer | Thickness |
|---|---|
| Fine clay plaster | 4 mm |
| Base clay plaster | 20 mm |
| EcoCocon panel | 300 mm |
| Exterior wood fibre insulation | 60–100 mm |
| Exterior airtight membrane | membrane |
| Wooden battens | 2 × 25 mm |
| Wooden facade | 25 mm |
459 to 499 mm in total. A comparison with the standard wall is in the Construction section.
What clay does
Clay plaster forms thermal mass inside the home. In the Nižný Klátov project there are heating mats in the wall, so heat radiates directly from the wall surface.
In an interview (in Slovak) Marek explains one more property: clay plaster sets by water evaporating. If you add water again, even after years it becomes the same material. Cement plaster sets chemically and cannot go back. That is why a natural house can be dismantled into its original raw materials at the end of its life.
What the owner says
Stano from Nižný Klátov first came across straw more than ten years ago, through friends and at workshops.
Natural materials give a warm feeling of home. I cannot explain it other than as a pleasant feeling when you move around here.
He also had a practical reason. The plot is on a slope where carrying building material would be very hard. A home made of finished modules solved that problem.
What to think about
- A straw wall is thicker, so with the same external dimensions there is less interior floor area.
- Clay surfaces need different care from paint: small damage can be repaired with clay.
- Natural materials cost more and demand more craft. Marek says this openly in the video too.
Frequently asked questions
Does a straw wall cost extra?
Straw panels are an alternative to the standard wall with wood fibre. We set the price for a specific home in the offer.
Where can I experience what it feels like?
In our hall in Levoča, Slovakia, we can show you material samples and a home in production. We arrange a visit after you request the documents.